Ieee1284 Parallel Interface; Electrical Specifications - SATO M-8400RVe Operator And Technical Reference Manual

Thermal transfer printer
Hide thumbs Also See for M-8400RVe:
Table of Contents

Advertisement

will go "low" (or an X-Off is sent) indicating the printer can no longer receive data.
will go "low" (or an X-Off is sent) indicating the printer can no longer receive data.
will go "low" (or an X-Off is sent) indicating the printer can no longer receive data.
This condition is called "Buffer Near Full."
This condition is called "Buffer Near Full."
This condition is called "Buffer Near Full."
DTR High
or
X-On
The receiving buffer will not be able to receive more data again until a "Buffer
Available" condition occurs. This takes place when the receiving buffer has emptied so
that only 1 MB bytes of data are being held (2.0 MB bytes from being full). At this
time, DTR will go "high" or an X-On is sent to tell the host that it can again receive
data.
DTR Low
or
X-Off
All printer error conditions (i.e., label out, ribbon out) will cause the printer to go
busy (DTR "low" or X-Off) until the problem is corrected and the printer is placed
on-line. The printer will also be busy if taken off-line from the front panel.

IEEE1284 PARALLEL INTERFACE

The parallel interface for the Series "e" printers is a Plug-In Interface Module that can
be installed by the user. It conforms to the IEEE1284 specification. It will
automatically detect the IEEE1284 signals and operate in the high speed mode. If it
does not detect the IEEE1284 signals, it will operate in the standard Centronics mode,
which is significantly slower. For this reason, an interface cable and host interface
conforming to the IEEE1284 specification must be present to fully utilize the speed
capabilities. This interface also operates bi-directionally and can report the status of
the printer back to the host.

ELECTRICAL SPECIFICATIONS

Printer Connector
Cable Connector
SATO M8400RVe
0
0
1 MB
AMP 57-40360 (DDK) or equivalent
AMP 57-30360 (DDK) or equivalent
PN 9001075A
Section 6: Interface Specifications
2.0 MB
Buffer Near Full
Buffer Available
2.95 MB
DTR Low
or
X-Off
2.95 MB
DTR High
or
X-On
Page 6-3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents