SATO M-8400RVe Operator And Technical Reference Manual page 181

SATO M8400RVe
6. In Manual Mode, The multiple data fields for numeric,
alphanumeric, Kanji and binary can be specified in a job. In this
case, the data fields for <ESC>2D30 and each data field must
follow the data field. Also, the maximum data size should be less
than 7000 bytes and the maximum block number for the data field
is 200.
7. If the parameters are not correctly specified, the symbol will not be
printed.
PN 9001075A
Section 5: Programming Reference
Page 5-115