SATO M-8400RV Operator And Technical Reference Manual page 236

Appendix D: Optional Features
ERROR DESCRIPTION
Low Battery - Low battery
condition is detected when printer
is powered on.
Card R/W Error
1. No card is inserted.
2. Card is write protected.
3. Invalid store/recall number.
4. Card has not been initialized.
Warning
1. Duplicate number.
2. Data not in print area.
3. Data overflows card memory.
Page D-6
INDICATION
STATUS LED: Red Blinking
Audible Beep: 1 long
Display: Card Low Battery
Depress LINE key to print Card
Status.
STATUS LED: Red
Audible Beep: 1 long
Display: Card R/W Error
Printer must be powered off to
reset.
Audible Beep: 1 short
Display: None
Printer will ignore invalid
commands.
9001041 Rev. D
REMEDY
Replace Memory Card battery.
Note that all data will be lost when
the battery is removed.
1. Insert card into selected slot.
2. Remove write protect tab.
3. Correct program
4. Initialize card with BJF command
1. Correct program.
2. Correct program.
3. Use card with more capacity.
SATO M-8400RV