SATO M-8400RV Operator And Technical Reference Manual page 234

Appendix D: Optional Features
8. Close the
9. The
General Operation
Send your data stream in the normal manner to the printer. Labels should print one
at a time, even if your print quantity command requests more than one label. As the
labels are printed and presented for the operator to remove, the backing paper will be
rewound on the spindle. The next label will only print after removing the current
label from the label exit path.
Note: The label dispenser will function only if it has been enabled using the front
panel switches (DSW3-1 and DSW3-2 in the ON positions).
The
label material. However, the use of labels with a substantially different opacity may
require that the threshold be adjusted.
Page D-4
and place the printer on-line.
is ready for use.
is adjusted at the factory for the optimal setting for most
9001041 Rev. D SATO M-8400RV