SATO M-8400RV Operator And Technical Reference Manual page 163

SATO M-8400RV
4. The Format ID specified for "aa" is defined by the following table.
The printer only supports the Format ID's defined in the table.
ID
NUMBER
01 Numeric, Space
02 Upper Case Alpha, Space
03 Upper Case Alpha, Space,Comma, Period,
Slash, Minus
04 Upper Case Alphanumeric, Space
05 ASCII 7-bit, Full Keyboard (20
06 ISO 8-bit, International (20
11 Numeric, Space
12 Upper Case Alpha, Space
13 Upper Case Alpha, Space, Comma, Period,
Slash, Minus
14 Upper Case Alphanumeric, Space
15 ASCII 7-bit, Full Keyboard (20
16 ISO 8-bit, International (20
5. The maximum number of data characters that can be specified for
either the 16-Bit or 32-Bit CRC modes is 500.
9001041 Rev. D
Section 4. Programming Reference
CHARACTER SET
16 Bit CRC
-7F )
H H
-FF )
H H
32 Bit CRC
-7F )
H H
-FF )
H H
ENCODING
SCHEME
Base 11
Base 27
Base 41
Base 37
ASCII
8-Bit
Base 11
Base 27
Base 41
Base 37
ASCII
8-Bit
Page 4-101