Runco RS-1100 CineWide User Manual page 87

Table 5-1. Troubleshooting Chart (continued)
Symptom
LAMP LED lights solid red.
TEMP LED lights solid red.
RS-900 and RS1100 Series Installation/Operation Manual
Possible Cause(s)
• The lamp has failed or
exceeded its usage life.
• RS-900/RS1100 internal
temperature is too high or
one or more fans have
failed.
Solution
• Replace the lamp with a
new one.
• Power off the
RS-900/RS1100 and allow
it to cool down. Ensure
that the intake and exhaust
vents are not blocked.
Turn the projector back
on. If the problem persists,
please contact your Runco
dealer for assistance.
71
Maintenance and Troubleshooting