Runco RS-1100 CineWide User Manual page 33

Table 3-3. Throw Ratios for the RS-900 and RS1100 Series (continued)
Throw
Ratio with
Projector Model
Primary
Lens Only
RS-900/CineWide
or
RS1100/CineWide
(McKinley Lens)
RS-900/CineWide
with AutoScope or
RS1100/CineWide
1.87 – 2.20
with AutoScope
(McKinley Lens)
Table 3-4 gives the throw ratios for the RS1100 Ultra.
Table 3-4. Throw Ratios for the RS1100 Ultra
Throw
Ratio with
Lens Option
Primary
Lens Only
Proteus B (Note 1) 1.06 - 1.20
Proteus C
1.40 - 1.50
Proteus D
1.55 - 1.98
Proteus D+Whitney
(Note 3)
Proteus E
2.07 - 3.00
Proteus E+Whitney
(Note 3)
Proteus F
3.10 - 4.80
Notes:
1. The Proteus B lens can only be used in rear-projection installations.
2. Only the Proteus D, E and F lenses can be used with the optional CineWide (secondary
anamorphic) lens. Doing so affects the throw distances as shown here.
3. When using the Proteus D or E with the Whitney anamorphic lens, the screen width must be
78 inches or greater and the throw distance must be 144 inches or greater.
RS-900 and RS1100 Series Installation/Operation Manual
Throw Range in Throw Ratio
inches, with
72.6x40.8-inch
(1.78:1) Screen
Anamorphic
Minimum Maximum
(n/a)
135.76 159.72
Throw Range in Throw Ratio
inches, with
72.6x40.8-inch
(1.78:1) Screen
Anamorphic
Minimum Maximum
76.96 87.12
101.64 108.90
112.53 143.75
Not Applicable
150.28 217.80
Not Applicable
225.06 348.48
Throw Range in
with inches, with
Primary 96x40.8-inch (2.35:1)
Lens and Screen
Minimum Maximum
Lens
1.40 – 1.65 134.40
1.40 – 1.65 134.40
Throw Range in
with inches, with
Primary 96x40.8-inch (2.35:1)
Lens and Screen
Minimum Maximum
Lens
Not Applicable
(Note 2)
1.18 - 1.48 113.28
1.85 - 1.98 177.60
1.57 - 2.24 150.72
2.07 - 3.00 198.72
2.35 - 3.57 225.60
17
158.40
158.40
142.08
190.08
215.04
288.00
342.72
Installation