Runco RS-1100 CineWide User Manual page 83

• Advanced Color Enhance (ACE): Use the Advanced Color Enhance (ACE) controls
to customize the stored color space characteristics. To do this, use the
to select a component color (Red, Green, Blue, Yellow, Cyan or Magenta).
For each component color, you can adjust the following:
• Limit: This slidebar adjusts the intensity – also known as luminance – of a given
color.
• Saturation: This slidebar adjusts the color saturation level – the amount of that color
in a video image. Lower settings produce less saturated colors; a setting of "0"
removes that color from the image entirely. If the saturation is too high, that color will
be overpowering and unrealistic.
To restore the color space settings to their factory-default values, select Reset to
Defaults and press ENTER.
• Gamut: Under most conditions, the White Balance and Advanced Color Enhance
(ACE) controls in the Calibration menu are adequate for producing accurate and
realistic colors from a variety of sources.
In rare cases, though, you may need more precise control over the RS-900/RS1100
display color gamut (range). For example, you may require a unique color gamut for a
given projector or application.
The RS-900/RS1100 enables you to define the precise hue of each primary color
component (white, red, green and blue) used to generate the millions of colors
produced in displays. You do this by specifying x/y coordinates and luminance values
for each primary color component.
The x and y coordinates for each color define its location on the standard CIE
chromaticity graph, shown in Figure 4-9. (CIE stands for "Commission Internationale de
l'Éclairage" (International Commission on Illumination), the organization responsible for
color measurement and management standards.)
1.0
y
0.9
0.8
0.7
0.6
0.5
0.4
D50
D65
D93
0.3
0.2
0.1
0.0
0.0 0.1 0.2 0.3
Figure 4-9. CIE 1931 Chromaticity Diagram
RS-900 and RS1100 Series Installation/Operation Manual
0.4 0.5 0.6 0.7 0.8
or
0.9 x 1.0
67
button
Operation