Using The Gt-Pro Connected To The Fc-200; Setting The Functions Related To The Fc-200; Switching Operation Of The Gt-Pro For Use With The Fc-200 (Fc-200 Mode); Setting The Operation Of The Fc-200'S Ctl Pedal (Fc-200 Ctl Pedal) - Boss GT-PRO Owner's Manual

Chapter 8 Using the GT-PRO Connected to the FC-200
You can connect the Roland FC-200 MIDI Foot Controller
(sold separately) to the GT-PRO.
Using the FC-200 makes changing patches and working with
effects more convenient ("Chapter 6 Using Pedals to Control
the Effects" (p. 61)).
To use the GT-PRO and FC-200 together, in order to
coordinate the operation of the GT-PRO with the FC-200's
controls, you need to make settings for both the GT-PRO and
the FC-200.
This section describes the settings required to connect and
use the FC-200 with the GT-PRO.
Setting the Functions Related
to the FC-200
Start by making the FC-200-related settings on the GT-PRO.
fig.08-0010
1. Press [SYSTEM].
2. Press PARAMETER [
parameters related to the FC-200.
fig.08-0020d
(Example)
3. Rotate the PATCH/VALUE dial to select the setting's
value.
4. Repeat Steps 2 and 3 as needed.
5. Press [EXIT] to return to the Play screen.
3 2 1
5
] [ ] to display the
Switching Operation of the GT-PRO for
Use with the FC-200 (FC-200 Mode)
Parameter/
Explanation
Range
FC-200 Mode
fig.08-0030d
Changes the GT-PRO's Bank display to 0–
Off, On 39, matching that of the FC-200 (one less
than what is normally indicated).
Off
Switches FC-200 Mode off. GT-PRO Banks 1–40 are indicated.
On
Switches FC-200 Mode on. Matching the FC-200's display, GT-PRO
Banks 0–39 are indicated.
* Once FC-200 mode is switched on, data describing the GT-PRO's own
operations, as well as data describing the usage of an expression pedal or
foot switch connected to the external pedal jack (MIDI PC OUT, MIDI
EXP1 OUT, etc.; p. 74) will no longer be output from the MIDI OUT
connector.
Setting the Operation of the FC-200's
CTL Pedal (FC-200 CTL Pedal)
Parameter/
Explanation
Range
FC-200 CTL Pedal
fig.08-0040d
Sets the operation of the FC-200's CTL ped-
Momentary, Latch
al.
Momentary
The pedal functions as a momentary switch, switching on (maxi-
mum value) when pressed and off (minimum value) when released.
Latch
The pedal functions as a latch switch, alternately switching on (max-
imum value) and off (minimum value) when pressed.
Limiting the Range of Banks Allowed
in Switching (FC-200 Bank Limit)
Parameter/
Explanation
Range
FC-200 Bank Lmt
fig.08-0050d
Sets the upper limit for banks that can be
0–39 switched when banks are specified with the
FC-200's BANK pedals.
81