Table of Contents
Advertisement
Switching the display
You can switch the song play screen between the
"chord progression display" (four measures x 3/
two measures x 3/one measure x 3) and the
"playback pattern display."
1. Press [DISPLAY].
Press the button repeatedly to cycle through
the available choices for the display, as
follows:
fig.03-171
Chord progression display (4 measures x 3 lines)
Chord progression display (2 measures x 3 lines)
Chord progression display (1 measure x 3 lines)
Playback pattern display
■ Chord progression display
fig.03-180d
( 1 ) ( 2 )
( 3 )
( 4 )
( 6 )
( 7 )
(1) Song mode
(2) Song number
(3) Current tempo
(4) Current key
(5) Song name
An "*" shown before the song name indicates
that the song has been edited.
(6) Time signature
(7) Measure – Beat
This indicates the current location.
(8) Current chord → Next chord
(9) Chord progression
fig.03-181d
( 5 )
■ Playback pattern display
( 9 )
fig.03-190d
( 8 )
(10) Current pattern
(11) Next pattern
The current chord and next chord will be
displayed in greater detail.
The cursor will move with the playback,
indicating the currently playing measure.
You can press [DISPLAY] to select the type of
chord progression display area that you
want, either "4 measures x 3 lines," "2
measures x 3 lines," or "1 measure x 3 lines."
Viewing fewer measures at a time will let you
see the chord progression in greater detail.
( 1 ) ( 2 )
( 3 )
( 4 ) ( 6 )
This indicates the currently playing pattern
(number/name).
This indicates the pattern (number/name)
that will play next.
Playing a song
4 measures
x 3 lines
2 measures
x 3 lines
1 measure
x 3 lines
( 5 )
( 7 )
( 10 )
( 11 )
83
Advertisement
Table of Contents
