Table of Contents
Advertisement
Transmitting a DR-880 bulk dump/Receiving a bulk dump back to the DR-880
Parameter/
Range
TSC:
All TSC user patches
GUITAR FX:
All guitar effects user patches
SYSTEM:
System settings (output setting, LCD contrast, key pad
sensitivity, master tune, foot switch, MIDI, count-in)
5. Press [ENTER].
The message "Now dumping..." will appear,
and the bulk dump will begin.
If you want to abort the bulk dump
transmission, press [EXIT].
When the message "Stopped" appears, press
[ENTER].
* If you execute Bulk Dump with "ALL" selected, it is
possible that the memory of the receiving device may fill
up during reception, and that no further data will be
received. If this occurs, choose a setting other than ALL
and execute Bulk Dump again.
132
Explanation
■ Returning the transmitted data
to the DR-880 (Bulk Load)
Transmit the data from the connected MIDI
device.
fig.08-100
MIDI OUT
Transmit device
(MIDI sequencer etc.)
1. With playback stopped, press [EDIT].
The edit menu screen appears.
2. Move the cursor to the "MIDI" icon, and
press [ENTER].
The MIDI menu screen appears.
3. Move the cursor to the "B. LOAD" icon
and press [ENTER].
The bulk load standby screen appears.
fig.08-110d
4. Transmit the data from the connected
MIDI device.
While the DR-880 is receiving data, the
message "Now receiving..." is displayed.
5. Press [EXIT] to complete the bulk load.
MIDI IN
Receive device
(DR-880)
Advertisement
Table of Contents
