Table of Contents
Advertisement
Recording a pattern
(1) POSITION
This shows the currently selected recording
position in "measure:beat:clock" units. You
can move the cursor to this indication and
use the VALUE dial to specify the
measure:beat:clock position, and then strike
a key pad to record directly into the specified
position.
(2) RANGE
This shows the range of the pitch bend that is
recorded at the currently selected position.
By moving the cursor to this indication and
turning the VALUE dial, you can edit the
range of the recorded pitch bend.
Range: 0–12
* If you set RANGE to a setting other than 12, that value
will take effect from the bass note at the next recorded
location. This means that if you want to record pitch bend
data with a RANGE setting other than 12, you'll need to
record a RANGE setting of the desired value and a
VALUE setting of 0 at a point earlier than the bass note
where you want your setting to take effect.
* RANGE is initialized to 12 at the beginning of the
pattern.
(3) VALUE
This shows the value of the pitch bend that is
recorded at the currently selected position.
By moving the cursor to this indication and
turning the VALUE dial, you can edit the
value of the recorded pitch bend.
Range: -8192–8191
6. Repeat steps 4–5 if necessary.
7. When you are finished recording, press
[EXIT].
8. If you want to save the pattern, proceed
to "Saving a pattern" (p. 65).
58
<4> Recording a chord
progression
Here you can record a chord progression for the
bass part.
1. Select the pattern for which you want to
record a chord progression.
2. Press [EDIT].
The edit menu screen appears.
3. Move the cursor to the "PATTERN" icon
and press [ENTER].
The pattern edit menu screen appears.
4. Move the cursor to the "CHORD" icon
and press [ENTER].
The chord progression recording screen
appears.
fig.02-240d
( 1 )
( 2 )
( 3 )
( 4 )
5. Move the cursor to "Qtz" and use the
VALUE dial to specify the quantization.
The number of grids in each measure of the
pattern display area will change according to
the quantization you specify. Each square is
one step.
Range
32nd notes
16th note triplets
16th notes
8th notes triplets
8th notes
quarter note triplets
quarter notes
whole notes
Advertisement
Table of Contents
