Recording a Sequence on Videotape or DVD
Now that you have finished the sequence, let's try recording it on videotape or DVD.
This section describes how to make the connection to a DV device using the method in "How to Connect
a Digital Video Deck Provided with a DV Jack" (p. 5).
* If only an analog connector is available, refer to "Connecting Video Equipment for Saving Video" on page 27
of the Owner's Manual.
1.
Connect the DV-7DL PRO and the recording unit.
If the recording unit has a DV input connector, use a DV cable to connect a DV jack on the DV-7DL PRO
(on either the front or rear panel) to the DV jack on the recording unit.
2.
Display the Output window.
Go to the top of the window and click "Output." The Output window appears.
fig. open output.eps
3.
Specify "Region Play (IN-OUT)."
Click "Region Play (IN-OUT)." Select the check box in front of the text (that is, place an "✔" in the check
box).
4.
Start recording.
Go to "Recording DV Control" and click the "Record" button. Recording starts on the connected digital
video device.
* Depending on the type of digital video device that is connected, remote control may not work. In such cases, start
recording by pressing the "Record Start" button on the digital video device.
44
Editing screen
Output Window