3.
Set an In point.
Clicking the "Set In Point" button sets an In point at the location of the position bar.
The portion after the In point in the waveform display turns blue.
waveform display
4.
Index the portion where you want to stop using material.
Click the "Play" button. The material is played back. When the portion of material that you need ends,
click the "Stop" button. Playback stops.
5.
Set an Out point.
When playback of the required portion ends, click the "Set Out Point" button to set an Out point. The
area between the In point and the Out point turns blue. The area in blue is the portion that you can use
in editing.
6.
Update the settings.
Click the "OK" button. The settings are applied and the Detail View window closes.
For a more detailed explanation, refer to page 58 of the Owner's Manual.
"Set In Point" button
"Play" button
"Stop" button
* For descriptions of other buttons, refer to page 56 of
the Owner's Manual.
"Set Out Point" button
Arranging Video Material
Starts playback.
Stops playback.
21