After Finishing Editing; Shutting Down - Roland Direct Linear DV-7DL PRO Quick Start Manual

After Finishing Editing

Shutting Down

When you have finished editing, turn off the power and end your work.
* If you want to continue with editing a different sequence, you need to open another project. For more information,
refer to "Open the project" on page 339 of the Owner's Manual.
* You can also save the project while editing a sequence. For more information, refer to "Saving a project" on page
340 of the Owner's Manual.
1.
Click the "EXIT" button.
Go to the top left of the editing screen and click the "EXIT" button. A window prompting you to confirm
shutdown appears. Click "EXIT" button. A window prompting you to save your project appears.
2.
Save the project.
A window prompting you to save your project appears. Click the "Save" button to save the project.
After the project is saved, the power is turned off.
* Projects that have been saved can be edited again later. For more information, refer to "Opening Previously
Created Projects" (p. 11).
* If you don't want to save the project, click the "Don't Save" button.
3.
Turn off the display and other peripheral equipment.
Switch off the power to the display, television monitor, and other equipment connected to the DV-7DL
PRO.
46
Shutdown prompt window