Installing The Postscript 3 Printer Driver (Windows Nt 4.0) - Ricoh CL3500N Software Manual

Preparing for Printing
❒ The printer driver with the selected language will be installed. The English
printer driver is installed when the following language is selected: Cestina,
Magyar, Polski, Portugues, Suomi.
D
Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
E
Click [Next >].
F
Click [Local Printer], and then click [Next >].
G
Click [Create a new port:].
H
Click [LPR Port] in [Create a new Port], and then click [Next >].
I
Enter the printer's IP address in the [Name or address of server providing lpd]
box.
J
Enter "lp" in the [Name of printer or print queue on that server box], and then
click [OK].
K
Check that the name of the printer whose driver you want to install is se-
lected, and then click [Next >].
L
Change the printer name if you want, and then click [Next >].
Select the [Yes] check box to configure the printer as default.
M
Click [Next >].
N
Specify whether or not to print a test page, and then click [Next >].
O
Click [Finish].
The printer driver installation starts.
❒ A User Code can be set after the printer driver installation. For information
about User Code, see the printer driver Help.

Installing the PostScript 3 Printer Driver (Windows NT 4.0)

❒ Installing this printer driver requires Administrators permission. Log on using
an account that has Administrators permission.
A
Quit all applications currently running.
B
Insert the CD-ROM into the CD-ROM drive.
40