Installing The Postscript 3 Printer Driver (Windows Nt 4.0 - Tcp/Ip) - Ricoh Aficio MP 2500SPF Supplement Manual

Windows Configuration
K
Enter a name for identifying the printer in [IPP Port Name]. Use a name dif-
ferent from the one of any existing port.
If a name is not specified here, the address entered in the [Printer URL] box be-
comes the IPP port name.
1
L
Click [Detailed Settings] to make necessary, and then click [OK].
For information about the settings, see DeskTopBinder - SmartDeviceMoni-
tor for Client Help.
M
Click [OK].
N
Check that the name of the printer driver you want to install is selected, and
then click [Next >].
O
Change the name of the printer if you want, and then click [Next >].
Select the [Yes] check box to configure the printer as default.
P
Specify whether or not to print a test page, and then click [Next >].
Q
Click [Finish].
The printer driver installation starts.
Note
❒ A user code can be set after the printer driver installation. For information
about user code, see the printer driver Help.
❒ Auto Run may not work with certain operating system settings. In that
case, launch "Setup.exe" on the CD-ROM root directory.
Installing the PostScript 3 Printer Driver (Windows NT 4.0 -
TCP/IP)
Important
❒ Installing this printer driver requires Administrators permission. Log on us-
ing an account that has Administrators permission.
❒ If your operating system is Windows NT4.0, download printer driver for
Windows NT4.0 from the supplier's Web site.
A
Double-click on "SETUP.EXE" in the downloaded folder.
Add Printer Wizard starts.
B
Select [My Computer], and then click [Next >].
C
Click [Add Port...].
D
Click [SmartDeviceMonitor], and then click [New Port...].
E
Click [TCP/IP], and then click [Search].
A list of printers using [TCP/IP] appears.
12