Alarm Setup Menu - Raymarine A Series A50 User's Reference Manual

MENU ITEM
Pressure Units
Select required pressure unit.
Volume Units
Select required volume unit.
System Integration Setup Menu
System integration is a sub-menu from the system setup menu.
MENU ITEM
DSC Message
When set to ON, details of distress DSC messages are
displayed on screen
SeaTalk Alarms
When set to enabled, all SeaTalk system alarms are
received and displayed on the chartplotter.
Data Master
When set to ON, the display you are working on is
defined as the master.
Bridge NMEA Heading
Used to prevent NMEA heading data being bridged
onto the SeaTalk bus.
Chapter 12: System Setup and Customizing
OPTIONS
Bar
Psi
Kpa
US Gallons
Imp Gallons
Litres
.
OPTIONS
ON
OFF
Enabled
Disabled
ON
OFF
ON
OFF
MENU ITEM
NMEA Output Setup
Allows you to switch off individual NMEA out sentences
NMEA Port Setting
Select the appropriate setting dependent on the equip-
ment attached to the NMEA port for each individual
display.
When Navtex 4,800 or 9,600 selected, the option to
view the Navtex message list is available.
Note: If AIS or Navtex has been set on any display in the system,
the menu options will be available on all displays. Navtex
and AIS are available simultaneously.

Alarm Setup Menu

The Alarm Setup Menu has five sub-menus:
• System Alarms Setup
• Navigation Alarms Setup
• Fishfinder Alarms Setup
• AIS Alarms Setup
To access alarm settings
1. Press and hold the PAGE/MENU button.
2. Select the Alarm Setup menu.
OPTIONS
APB, BWC, BWR,
DBT, DPT, GGA,
GLL, MTW, RMA,
RMB, RMC, RSD,
RTE, TTM, VHW,
VLW, VTG, WPL,
ZDA
NMEA 4,800
Navtex 4,800
Navtex 9,600
AIS 38,400
131