Trim Tab Display Calibration; Setup Menu - Raymarine i70 Installation Instructions Manual

5.7 Trim tab display calibration

Calibrating trim tabs display position
The i70 can display, on screen the position of your vessel's trim
tabs, in order for this function to show correct position the trim tab
display must be calibrated as shown in the steps below:
1. From the Transducers found page highlight and select Trim
Tabs.
2. Using the vessel's trim tab control unit move the trim tabs all
the way up.
3. Once both trim tabs are fully up press CONTINUE.
4. Using the vessel's trim tab control unit move the trim tabs all
the way down.
5. Once both trim tabs are fully down press CONTINUE.
6. Press OK to return to the Transducer set up menu.
44

5.8 Setup menu

The setup menu provides a range of tools and settings to configure
the instrument display.
Menu item Description
Transducer setup Set up and calibrate
transducers as detailed
in Transducer calibration
section above.
User preferences Set user preferences
such as: Time & Date,
Units of measurement,
Language, Vessel type,
Vessel details, and
Variation.
System set up Set system network
groups, display and
system color and
brightness, Multiple
data sources and about
system setup
Options
• Depth
• Speed
• Wind
• DST800
• DT800
• Trim tabs
• Time & date
• Units
• Language
• Vessel type
• Vessel details
• Variation
•
• Network group
• Brightness / color
group
• Multiple data sources
• About system setup
i70 Instrument display Installation instructions