Chart Setup - Raymarine A Series A50 User's Reference Manual

4.13 Chart setup

There are three ways you can change chart settings:
• Chart Setup Menu.
• Cartography Setup Menu.
• Presentation softkey (see
Changes are retained when you power off.
To open the Chart Setup Menu
1. Press and hold the PAGE/MENU button.
2. Highlight Chart Setup.
3. Press the right-arrow on the trackpad.
FUNCTION
Object Information
Vector Length
Specify a time period for drawing
COG and heading vectors.
Chapter 4: The chart application
page 51).
OPTIONS
OFF
No info pop-up is displayed but detailed
data can still be displayed by pressing OK.
All ON
Displays an information pop-up for all
objects.
Points ON
Displays an information pop-up for objects
selected with the cursor only.
3 Mins
6 Mins
Infinite
FUNCTION
Vector Width
Sets the width of the COG and
HEADING chart vector lines.
Record Vessel Track By
Track Interval
Option availability depends upon
Record Vessel Track By setting.
Datum
See additional information
below.
Chart Offset
Corrects positional errors in
cartography.
OPTIONS
Thin
Normal
Wide
Auto
System automatically creates track points.
Time
For track point creation by a specified time.
Distance
For track point creation by a specified
distance.
Time
Specify time between track points.
2/5/10/30 seconds
1/3/5/10/30 minutes
Distance
Specify distance between track points.
0.02/0.05/0.1/0.2/0.5/1.0 nm
WGS 84.
List of datum provided.
ON
OFF
59