Csd Line Type - QTek 2020i User Manual

To change modem connection settings, in either My ISP or My Work Network, tap Manage
existing connections. Select the desired modem connection, tap Settings, and follow the
instructions on the screen.
Connecting to a private network
1. Obtain the following information from your network administrator:
n
n
n
2. Select Start > Settings > the Connections tab > Connections.
3. In My Work Network, follow the instructions for each type of connection.
4. To start the connection, start using a related program. For example, switch to Pocket
Internet Explorer and browse to a Web page. Your device will automatically connect.

6.3 CSD Line Type

This program allows you to choose the line type when you make a circuit switch data
connection.
Changing a CSD Line type
1. Select Start > Settings > Connections > CSD Line Type.
2. In Data rate, select a value. In Connection element, choose a type from that drop-down
menu. Tap OK.
NOTE: The default setting on your Pocket PC Phone is set for the most optimal use. Do
not change this setting unless you have trouble using the circuit switch data connection.
GPRS Setting
This program (Start > Settings > Connections > GPRS Setting) allows you to choose the
GPRS setting method when you make a GPRS connection. Choose between these two
authentication methods:
PAP authentication: Password Authentication Protocol is a simple authentication protocol
n
used to authenticate a user to a remote access server of an ISP (Internet Service Provider).
CHAP authentication: Challenge Handshake Authentication Protocol is used to negotiate
n
the most secure form of encrypted authentication supported by both server and client.
NOTE: Changing these settings may cause your data communications to no longer operate.
Please consult your service provider before altering these settings.
Server phone number
User name
Password
Pocket PC Phone User Manual
85