QTek 2020i User Manual page 105

105
Pocket PC Phone User Manual
Settings screen
Power Save Mode
WLAN consumes a significant amount of power, and will run down your Pocket PC Phone's
battery quicker when the WiFi connection is in use. The Power Save Mode option provides
three settings. By default, the power save mode is set to the best compromise between
battery conservation and signal performance. You can change this by dragging the Indicator
on the bar, or by tapping on the Indicator Bar itself. The Best Battery setting will conserve
more battery power at the expense of performance. The Best Performance setting will
consume more battery power.
Auto turn off WLAN if not connected
If this checkbox is checked, the WLAN function will automatically turn OFF if no signal is
detected, which helps to conserve battery power. From the drop-down list, select 2, 3, 4,
or 5 minutes. If, for example, 3 minutes is selected, then WLAN will automatically turn OFF
if no signal is detected for a period of three minutes.
LEAP screen
LEAP is "Lightweight Extensible Authentication Protocol." This feature of the Wireless
LAN Manager allows you to increase the security of your device to ensure that no one can
access your network without your permission. By default, the LEAP screen displays data
you previously entered, and you can modify it or delete it, if desired, by selecting it and then
tapping the Modify or Delete button.
To enter new data, tap the New button. Then enter the appropriate SSID (Service Set
Identifier), User Name, Password, Domain, and select an Authentication Type. Most 802.11
access points offer by default a form of authentication called Open System authentication,
which is the default Authentication Type setting on your Pocket PC Phone. In this mode, the
access point grants approval for any request for authentication. The client simply sends an
authentication request frame, and the access point responds with an authentication approval.
This allows anyone having the correct SSID to associate with the access point.
Note that for LEAP to work correctly, both the access point and the receiving device (your
Pocket PC Phone) must be set with the same SSID, User Name, and Password.