Starting Up - QTek 2020i User Manual

Pocket PC Phone User Manual
18

2.1 Starting Up

Turning your Pocket PC Phone On and Off
To turn your device on:
Press the Power button on the top side of the device. (The Pocket PC Phone will power up
and, if this is the first time it has powered up, will automatically begin the initiation/calibration
process. See below for further details.)
To turn your device off:
Press the Power Button on the top side of the device.
Note: Turning your device off doesn't turn the phone off. To turn the phone off, select the
GSM icon and select "Turn on flight mode".
Screen tapping and calibration
When you first start up your Pocket PC Phone, you will be asked to calibrate the screen by
tapping the center of a cross with your stylus as it moves around the screen. This process
ensures that when you tap the screen with your stylus, the tapped item is activated.
Re-calibrating the screen
If your Pocket PC Phone does not accurately respond to screen taps, you will need to re-
calibrate it:
1. Tap Start > Settings > the System tab > Screen.
2. Tap the Align Screen button in the General tab to re-calibrate the screen as described
above.
Note: When aligning the touch screen, tap the target firmly and accurately.