QTek 2020i User Manual page 101

5. Select the Display a list of the known drivers for this device so that I can choose a
specific driver option, and then click Next.
6. Select Modem from the Hardware types list, and then Next.
7. Click the Have Disk button, and then Next.
8. Select the recognized USB Modem in the Models list, and then Next. After the installation
is completed, select Finish.
9. After the installation, a new USB modem can be found in the Modem list by tapping Start
> Settings > Control Panel > Phone and Modem Options on your PC.
10.Double-click the USBModem_Dialer file on the Application CD and set the GPRS settings
(enter the APN assigned by your ISP) in the blank text box and press Dial to start the
connection.
Connecting via Bluetooth
Before starting to use your Pocket PC Phone as a Bluetooth modem, you must be sure that
your PC is a Bluetooth-enabled device. In addition, you still need to check the following:
Ensure that a GPRS-enabled SIM card is inserted in your Pocket PC Phone.
n
Disable the ActiveSync BT port connection of your PC.
n
Disable the Infrared function by tapping Start > Settings > the Connections tab > Beam.
n
Then uncheck Receive all incoming beams.
1. To begin, select Start > Programs > Wireless Modem.
2. Select the Bluetooth connection type from the drop-down list, and tap the Start button.
3. Open your Pocket PC Phone from the Bluetooth application installed on your PC.
NOTE: The interface of the Bluetooth application installed on your PC will vary, depending
on the Bluetooth module embedded or attached in your PC when you purchased it. Follow
the installation instructions of the connected Bluetooth device's manual.
Pocket PC Phone User Manual
101