Important Health And Safety Information - QTek 2020i User Manual

ETSI EN 300 328
n
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission
systems; data transmission equipment operating in the 2.4 GHz ISM band and using spread
spectrum modulation techniques.
GSM11.10
n
ANSI/IEEE C.95.1-1992
n
Specific absorption rate in mobile phone emission condition for body health.
EN50360, EN50361 for SAR
n

Important Health and Safety Information

Retain and follow all product safety and operating instructions. Observe all warnings in the operating
instructions on the product.
To reduce the risk of bodily injury, electric shock, fire, and damage to the equipment, observe the
following precautions.
General Precautions
Heed service markings
n
Except as explained elsewhere in the Operating or Service documentation, do not service any
product yourself. Service needed on components inside these compartments should be done
by an authorized service technician or provider.
Damage requiring service
n
Unplug the product from the electrical outlet and refer servicing to an authorized service technician
or provider under the following conditions:
l Liquid has been spilled or an object has fallen into the product.
l The product has been exposed to rain or water.
l The product has been dropped or damaged.
l There are noticeable signs of overheating.
l The product does not operate normally when you follow the operating instructions.
Avoid hot areas
n
The product should be placed away from heat sources such as radiators, heat registers, stoves,
or other products (including amplifiers) that produce heat.
Avoid wet areas
n
Never use the product in a wet location.
Pocket PC Phone User Manual
183