Setting Up For Controlling A D-Vhs Recorder; Editing The I.link Setup - Pioneer PRO-1130HD Operating Instructions Manual

Enjoying through External Equipment
12

Setting up for controlling a D-VHS recorder

You can operate the connected D-VHS recorder from the
Plasma Display that shows the control panel screen. After
making the connections, use the menu to specify the model of
the D-VHS recorder to be operated. If you have 2 or more D-VHS
recorders connected to the Media Receiver, you can operate a
single device at a time.
1
Press HOME MENU.
2
Select "Tuner Setup". ( /
3
Select "i.LINK Setup". ( /
4
Select the D-VHS recorder model to be operated. ( /
then ENTER)
i.LINK Setup
D-VHS1 XXXX XXXX Control
Connect Rename
A B
5
Press A to select "Connect".
6
Press HOME MENU to exit the menu.
NOTE
• The following information appears at the right end of the
i.LINK list to indicate the connection status of the D-VHS
recorders:
Control: Data connection with the D-VHS recorder has been
established and the recorder is ready for control.
Link: The D-VHS recorder has been physically connected,
and can be controlled if it is selected for control.
—: Currently not physically connected
• When connected to any device other than a D-VHS, the
device is not listed in the i.LINK List.
74
En
then ENTER)
then ENTER)
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
Move Delete Home Menu Exit
C D

Editing the i.LINK Setup

The i.LINK list shows all devices connected through i.LINK
interfaces. In this list, you can change the name or order of
devices or delete device information.
1
Press HOME MENU.
2
Select "Tuner Setup". ( /
3
Select "i.LINK Setup". ( /
4
Select the desired device. ( / )
i.LINK Setup
D-VHS1 XXXX XXXX Control
---
---
Connect Rename
A B
The following procedure differs depending on what you want to
perform.
To change the name of a device:
5
Press B to select "Rename".
6
Enter up to 7 characters using
i.LINK Setup
New Name: D-VHS
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z 1 2 3 4
5 6 7 8 9 0 . @ / (
) , – _ : ' &
S P A C E
Accept Clear
A B
7
Press A.
8
Press HOME MENU to exit the menu.
To change the order of devices:
5
Press C to select "Move".
6
Select the new desired position. ( /
• The selected device is moved to the selected position.
7
Press HOME MENU to exit the menu.
To delete information about a device:
5
Press D to select "Delete".
• A confirmation message appears.
• A warning message appears if the selected device has
been preset for recording or while it is in use. If this is
the case, you cannot delete the device that you have
selected.
6
Press A to execute the deletion.
7
Press HOME MENU to exit the menu.
then ENTER)
then ENTER)
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
Move Delete Home Menu Exit
C D
/ , / , and ENTER.
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
Cancel Home Menu Exit
D
then ENTER)