Remote Control Unit - Pioneer PRO-1130HD Operating Instructions Manual

Part Names
04

Remote control unit

This section describes the functions of the buttons available
when the mode switch has been set to TV. For the buttons for
controlling other equipment, see "Using the remote control
unit to control other devices" starting from page 84.
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1 TV a: Turns on the power to the Plasma Display or
places it into standby mode.
2 Transmission confirmation LED
3 INPUT: Selects an input source of the Plasma
Display. (INPUT 1, INPUT 2, INPUT 3, INPUT 4, PC,
i.LINK)
4 0 – 9: Selects the channel.
5 •(dot): Enters a dot.
6 CH RETURN: Returns to the previous channel. This
button is disabled while the TV Guide On Screen™
system is displayed.
7 CH +/–: Selects the channel.
PAGE +/– (for the TV Guide On Screen™ system):
Scrolls the program listing screen vertically.
RETURN: Returns to the previous menu screen.
8
9 / / / : Selects a desired item on the menu
screen.
16
En
Mode switch (with
"TV" selected)
1 2
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
10 INFO: Displays a channel banner when a TV
program is being watched.
When the TV Guide On Screen™ system is in operation,
displays information about the currently highlighted
channel (if available).
11 MENU: Displays a panel menu in the TV Guide On
Screen™ system.
12 FREEZE: Freezes a frame from a moving image.
Press again to cancel the function.
13 SPLIT: Switches the screen mode among 2-screen,
picture-in-picture, and single-screen.
14 SHIFT: Moves the location of the small screen when
in the picture-in-picture mode.
15 SWAP: Switches between the two screens when in
the 2-screen or picture-in-picture mode.
16 FAVORITE CH (A, B, C, D):
Selects any of the four preset channels. See page 43
for details to set the FAVORITE CH.
While watching, you can toggle the set channels by
pressing A, B, C and D.
17 D: When pressed, all buttons on the remote control
unit will light. The lighting will turn off if no
operations are performed within about 5 seconds.
This button is used for performing operations in dark
places.
18 ANT: Selects the antenna (A, B). See pages 20 and
21 for details.
19 MTS: Selects the MTS/SAP.
20 CH ENTER: Executes a channel number.
21 VOL +/–: Sets the volume.
22 M MUTING: Mutes the sound.
23 HOME MENU: Displays the Home Menu screen.
24 ENTER: Executes a command.
25 TV GUIDE: Displays the TV Guide On Screen™
system.
26 DAY +/–: Jumps to the next or previous day of
program listings in the TV Guide On Screen™ Listing
service.
27 DISPLAY: Displays the channel information.
28 SCREEN SIZE: Selects the screen size.
29 SLEEP: Sets the sleep timer.
30 AV SELECTION: Selects audio and video settings.
(AV mode: STANDARD, DYNAMIC, MOVIE, GAME,
USER, PURE. PC mode: STANDARD, USER.)
31  (REC): When using the TV Guide On Screen™
System, starts recording with a connected VCR or
D-VHS recorder.
NOTE
• When using the remote control unit, point it at the Plasma
Display.
• See pages 82 to 88 for operating buttons not listed on this
page.