Table of Contents
Advertisement
Enjoying through
External Equipment
Setting
up for controlling
a D-VHS
recorder
You carl operate the connected D-VHS recorder from tile
Plasma Display that shows the control panel screen. After
making the connections,
use the menu to specify the model of
the D-VHS recorder to be operated. You can operate only a
single D-VHS recorder from the Plasma Display.
1
Press HOME MENU.
2
Select "Tuner Setup". (4F/4, then ENTER)
3
Select "Recorder Setup". (÷/-b then ENTER)
4
Select "i.LINKSetup".
(÷/,l, then ENTER)
5
Select "i.LINK List". (÷/4k then ENTER)
6
Select the D-VHS recorder model to be operated.
(÷/4, then ENTER)
Editing
the
i.LINK
list
Tile i.LINK list shows all devices connected through i.LINK
interfaces. In this list, you can change the name or order of
devices or delete device information.
1
Press HOME MENU.
2
Select "Tuner Setup". (4=/4, then ENTER)
3
Select
4
Select
5
Select
6
Select
"Recorder Setup". (÷/._ then ENTER)
"i.LINK Setup". (4=/41 , then ENTER)
"i.LINK List". (4=/4, then ENTER)
the desired device. (÷/4k)
7
Press A to select "Connect".
8
Press HOME MENU to exit the menu.
r_
NOTE
• The following information
appears at the right end of the i.LINK list to
indicate the connection status of the D-VHS recorders:
Control:
Data connection with the D-VHS recorder has been
established
and the recorder is ready for control,
Link:
The D-VHS recorder has been physically con-
nected, and can be controlled if it is selected for
controk
--:
Currently not physically connected
• When connected to any device other than a D-VHS, the device is not
listed in the i,LINK List.
The following procedure differs depending on what you want to
perform.
To change
the name of a device:
7
Press B to select "Rename".
8
Enter up to 7 characters
using ÷/4k, ÷/-b and ENTER.
9
Press A.
10
Press HOME MENU to exit the menu.
To change
the order of devices:
7
Press C to select "Move".
8
Select the new desired position. (÷/4, then ENTER)
• The selected device is moved to the selected position.
9
Press HOME MENU to exit the menu.
To delete
information
about a device:
7
Press D to select "Delete".
• A confirmation
message appears.
• A warning message appears if the selected device has
been preset for recording with the timer or if its power
is on. If this is the case, you cannot delete the device
that you have selected.
8
Press A to execute the deletion.
9
Press HOME MENU to exit the menu.
En
Hide quick links:
Advertisement
Table of Contents
