Manual Image Position And Clock Adjustments (Pc Mode Only); Selecting A Screen Size Manually; Manual Setup - Pioneer PRO-1130HD Operating Instructions Manual

Adjustments and Settings
Manual image position and clock
adjustments (PC mode only)
Usually you can easily adjust the positions and clock of images
using Auto Setup. Use Manual Setup to optimize the positions
and clock of images when necessary.
1
Press HOME MENU.
2
Select "Option". ( / then ENTER)
3
Select "Manual Setup". ( /
4
Select an item to be adjusted. ( /

Manual Setup

H/V Position Adjust
Clock
Phase
Reset
5
Perform adjustment. ( /
• With "Clock" or "Phase" selected, you can change the
parameter using / .
6
Press HOME MENU to exit the menu.
NOTE
• To restore the factory defaults for all the items, press
select "Reset" in step 4, and then press ENTER. A
confirmation screen appears. Press
then press ENTER.
then ENTER)
then ENTER)
0
0
or / )
/ to
/ to select "Yes", and

Selecting a screen size manually

In single-screen mode, press SCREEN SIZE to change the size
of the screen from among the selectable options for the type of
video signals currently received.
• The selectable screen sizes differ depending on the types of
input signals.
AV mode
Item Description
For 4:3 "standard" pictures. A side bar appears on each
4:3
side.
For 16:9 squeezed pictures.
FULL
For 16:9 letterbox pictures. Bars may appear on the top
ZOOM
and bottom on some programs.
For 14:9 letterbox pictures. Bars may appear on the top
CINEMA
and bottom on some programs.
In this mode pictures are progressively stretched toward
WIDE
each side of the screen.
PC mode except for XGA signals
Item Description
Fills the screen without altering the input signal aspect
4:3
ratio.
Full 16:9 screen display
FULL
Matches input signal with same number of screen
Dot by Dot
pixels.
PC mode for XGA signals
(Ex. 1024 × 768 input with PRO-1130HD)
Item Description
Matches input signal with the same number of screen
4:3
pixels.
Optimized for 1024 × 768 display
Full 16:9 screen display
FULL1
Optimized for 1024 × 768 display
For wide signal display
FULL2
Use when displaying 1280 × 768 signal resolution.
NOTE
• In 2-screen mode, press SCREEN SIZE to change the size of
the left screen.
• The PC mode above is for the PRO-1130HD. For the PRO-
930HD the number of panel pixels is different, so signal
processing and actual viewing conditions will vary slightly.
• While watching High Definition TV broadcasting, pressing
SCREEN SIZE switches among FULL, ZOOM, WIDE, and 4:3.
• If you watch High Definition TV broadcasting with WIDE
selected, part of the screen (e.g., images, graphic interface)
may not appear on the display. If this is the case, select FULL.
11
65
En