Installation of the Attachment Stand
4.3 Installation of the Attachment Stand
1.
Make sure to secure the attachment stand to the
display platform using M8 bolts (commercially
available) 25 mm longer than the thickness of the
platform.
*
1
: PDP-503CMX/PDP-503MXE
*
2
: PDP-433CMX/PDP-433MXE
Front
110
2.
Insert the unit into the stand.
70
Rear
[503CMX/503MXE : 433CMX/433MXE]
3.
Tighten the bolt against the washer so as to secure
the unit.
The unit weights 30 kg. or more, and its
thinness makes it unstable. Therefore, it
CAUTION
should be unpacked, carried and installed
by two or more persons.
Use a 6 mm hexagonal
wrench to tighten the bolt.