Selecting A Screen Size Automatically; Selecting A Screen Size For Received 4:3 Aspect Ratio Signals; Changing The Brightness At Both Sides Of The Screen (Side Mask); Language Setting - Pioneer PDP-4270HD Operating Instructions Manual

Adjustments and Settings
11

Selecting a screen size automatically

The Plasma Display automatically selects an appropriate
screen size when video signals are received from a connected
HDMI equipment (see page 72). To activate this function, use
the following procedure.
1
Press HOME MENU.
2
Select "Option". ( /
3
Select "Auto Size". ( /
4
Select "On". ( /
Auto Size
Off
On
Item
Off
(factory default)
On
5
Press HOME MENU to exit the menu.
NOTE
• Manually select an appropriate screen size if an image does
not automatically switch to a correct screen format.
• When the video signal contains no aspect ratio information,
the function will not work even with "On" selected.
Selecting a screen size for received 4:3 aspect
ratio signals
Specify whether the Plasma Display should choose the 4:3
mode or WIDE mode when 4:3 aspect ratio signals are received
with the Auto Size function activated.
1
Press HOME MENU.
2
Select "Option". ( /
3
Select "4:3 Mode". ( /
4
Select "WIDE" or "4:3". ( /
4:3 Mode
WIDE
4:3
Item
WIDE
(factory default)
4:3
WIDE
5
Press HOME MENU to exit the menu.
70
En
then ENTER)
then ENTER)
then ENTER)
Description
Deactivates the Auto Size function.
Activates the Auto Size function.
then ENTER)
then ENTER)
then ENTER)
Description
Wide image without side masks
Keeps the 4:3 aspect ratio and presents side
masks.
4:3
Changing the brightness at both sides
of the screen (Side Mask)
With the 4:3 screen size selected for the AV mode, you can
change the brightness of the gray side masks that appear at
both sides of the screen.
1
Press HOME MENU.
2
then ENTER)
Select "Option". ( /
3
Select "Side Mask". ( /
4
Select the desired parameter. ( /
Item Description
Fixed Always sets the same brightness for the gray side
(factory default) masks.
Auto Adjusts the brightness of the gray side masks
according to the brightness of images.
5
Press HOME MENU to exit the menu.
NOTE
• Displaying pictures in 4:3 screen mode for an extended
period may cause an after-image.

Language setting

You can select a language to be used for on-screen display
such as menus from among three languages: English, French,
and Spanish.
1
Press HOME MENU.
2
then ENTER)
Select "Option". ( /
3
Select "Language". ( /
4
Select a language. ( / )
Language
Menu
5
Press HOME MENU to exit the menu.
then ENTER)
then ENTER)
then ENTER)
English