Pioneer PDP-4270HD Operating Instructions Manual page 11

Safety Precautions
Installation Precautions
Observe the following precautions when installing with any
items such as the optional bracket.
When using the optional brackets or equivalent
items
• Ask your dealer to perform the installation.
• Be sure to use the supplied bolts.
• For details, see the instruction manual that comes with the
optional bracket (or equivalent items).
When using other items
• Consult your dealer.
• The following six mounting holes (four holes for the PDP-
6072HD/PDP-6071HD/PDP-6070HD) can be used for the
installation:
Rear view (PDP-6072HD/PDP-6071HD/PDP-6070HD)
Mounting
hole
Median line
Rear view (PDP-5072HD/PDP-5071HD/PDP-5070HD)
Mounting
hole
Median line
Rear view (PDP-4272HD/PDP-4271HD/PDP-4270HD)
Mounting
hole
Median line
Side view
• Be sure to use four or more mounting holes symmetrical to
the vertical and horizontal median lines.
Mounting
hole
• Use M8 screws, which go 12 mm to 18 mm (1/2 inches to
11/16 inches) in depth from the mounting surface of the
Median
Plasma Display. See the side view above.
line
• Be careful not to block the ventilation opening at the rear of
the Plasma Display.
• Be sure to install the Plasma Display on a flat surface
because it contains glass.
• The screw holes other than the above are to be used only for
the specified products. Never use them for mounting non-
specified products.
• It is strongly recommended to use the optional PIONEER
mounting products.
Mounting
• PIONEER shall not be liable for any personal injury or
hole
Median
product damage that results from the use of mounting items
line other than the optional PIONEER products.
Mounting hole
Median
line
Mounting surface
Plasma
Display
12 mm to 18 mm
(1/2 inches to 11/16 inches)
CAUTION
NOTE
Mounting
bracket (or
equivalent item)
M8 screw
02
11
En