Control Equipment With The Panel's Remote Through Hdmi - Pioneer Kuro KRP-500M Operating Instructions Manual

Use Other Equipment With Your Flat Panel Display
06

6.4 Control Equipment with the Panel's Remote Through HDMI

Your flat panel display's remote can control other equipment such as a Pioneer AV system, or BD/DVD player that
supports the KURO LINK or HDMI Control functions featured in conventional Pioneer products. The KURO LINK
functions include playback of content using an on-screen control panel. However, not all device operations may be
available through KURO LINK. For details, see the charts below.
Note: Except for Power OFF and Display Language Setup functions, only a single HDMI terminal may be active at
a time.
The flat panel display's remote can control a maximum of two (2) recorders, two (2) playback devices, and one (1)
AV system at a time.
To select and use the various KURO LINK functions for a connected Pioneer AV system, recorder, or player, use
the panel's KURO LINK menu.
To access the KURO LINK menu, follow the steps below.
1 ) Press USER MENU on the remote.
2 ) Select KURO LINK from the main menu.
Use the arrow buttons to highlight an option then press
60
En
Controlled
Control Function
Equipment
Playback of Recorder
content Player
On-screen control Recorder
Player
Display Language Recorder
Setup Player
AV system control AV system
Power ON Recorder
Player
Power OFF Recorder
Player
AV system
Disc Navigator
Timer REC (DVR)
Timer REC List (DVR)
Pause Live TV
Stop REC (DVR)
CTRL Panel(AV-SYS)
Playback CTRL Panel
Switch to AV Sound
Switch to FPD Sound
Function Description
Pressing PLAY automatically selects
the source and begins playback
Recorder/player operation controlled
on-screen or with the panel's remote
(play, stop, fast forward/reverse, etc.)
Information on the display menu
language transfers to the recorder or
player (for details, see the operation
manual that came with the device)
Receiver/amplifier operation also
controlled with the panel's remote
(input through the HDMI port)
Panel turns On when a connected
device is turned On and send images
to the panel
Connected device(s) turn Off when
the panel is turned Off
ENTER.