Starting The Slide Show Setup Screen; Starting The Slide Show Screen; Adjusting The Picture Quality; Controlling Other Equipment Using The Supplied Remote Control Unit - Pioneer PDP-506XDE Operating Instructions Manual

Enjoying through External Equipment

Starting the Slide Show Setup screen

When the thumbnail screen is in display, press GREEN to start
the screen for setting up for Slide Show that sequentially
changes images.
1
Select "Display Mode" ( / ).
2
Select "Normal" or "Full" ( / ).
• With "Full" selected, images are displayed using the full
screen.
3
Select "Playback Order" ( / ).
4
Select "Name Order" or "Random" ( / ).
5
Select "Number Of Times Of Playback" ( / ).
6
Select "Single Time" or "Loop" ( / ).
• With "Loop" selected, Slide Show is repeated until
RETURN is pressed.
7
Select "Playback Mode" ( / ).
8
Select "Auto" or "Manual" ( / ).
• With "Auto" selected, images are automatically
changed at the specified intervals.
• With "Manual" selected, images are changed each time
you press P +/P –.
Slide Show Setup
Display Mode
Playback Order
Number Of Times Of Playback
Playback Mode
Interval(sec)
9
If you have selected "Auto" in step 8, press
"Interval(sec)", and then press
display duration for individual images.
• You can select from among 3 seconds, 5 seconds, 10
seconds, 20 seconds, 30 seconds, 60 seconds, and 90
seconds.
10
To start the Slide Show screen, press RED.
• To restore the thumbnail screen, press RETURN.
• To quit the Home Gallery function, press HOME MENU.

Starting the Slide Show screen

After setting up for Slide Show, you can start Slide Show to
sequentially change images.
1
To start the Slide Show screen, press RED when the Slide
Show Setup screen or a thumbnail screen is in display.
• With "Auto" selected for "Playback Mode", images are
automatically changed at the specified intervals.
• With "Manual" selected for "Playback Mode", press
P +/P – to change images.
• While images are automatically changed, you can stop
and hold automatic image change for approximately 90
seconds by pressing d.
2
When quitting the Slide Show screen, press RETURN to
restore the thumbnail screen or HOME MENU to quit the
Home Gallery function.
NOTE
• With "Random" selected for "Playback Order" selected, you
cannot press P – to manually change images.
Normal Full
Name Order Random
Single time Loop
Auto Manual
3 5 10 20 30 60 90
/ to select
/ to select the desired

Adjusting the picture quality

When a thumbnail screen is in display, press YELLOW. The
same picture adjustment screen as the PC source is displayed.
For the subsequent procedure, see page 33.
Controlling other equipment using the
supplied remote control unit
Using the supplied remote control unit, you can control other
equipment in connection: a set-top box (STB), DVD player, DVD
recorder (DVR), or VCR.
Before using this function, you need to preset the supplied
remote control unit with the manufacture code of the
equipment to be controlled. When you then want to control the
equipment, press SELECT on the remote control unit to select
an appropriate mode depending on the equipment; the
selection is switched among TV, STB, DVD/DVR, and VCR. The
corresponding mode indicators on the remote control unit
show the currently selected mode.
TV/DTV
P
SELECT
TV STB
Presetting manufacture codes
1
Press SELECT on the remote control unit to select the STB,
DVD/DVR, or VCR mode depending on the equipment.
2
After confirming that the indicator of the previously
selected mode goes off, press and hold SELECT, and then
press 1 on the remote control unit.
• The corresponding mode indicator flashes.
3
Press 0 – 9 to enter a 3-digit manufacture code.
• See the manufacture code list on page 70 to identify an
appropriate code.
• The mode indicator lights up for approximately one
second and then goes off; presetting the manufacture
code is completed.
1
4
7
PC
INPUT 5
TV/DTV
P
SELECT
TV STB
DVD/
SOURCE
DVR VCR
2 3
5 6
8 9
INFO
0
DVD/
SOURCE
DVR VCR
13
69
En