Adjust Color Signals - Pioneer Kuro KRP-500M Operating Instructions Manual

Additional Picture Adjustment Options
05
5 ) Press HOME MENU to exit the menu.
Note: This setting applies only to input video signals.

5.3.10 Adjust Color Signals

Your flat panel display features various color signal adjustment options: 3DYC, I-P Mode, Drive Mode, Game
Control Pref., and Blue Only Mode. Use these options to adjust color signals for both video and still images.
To select color signal adjustment options, follow the steps below.
1 ) Access Pro Adjust through the Picture menu
2 ) Select Other from the Pro Adjust menu.
3 ) Select 3DYC, I-P Mode, Drive Mode, Game Control Pref
4 ) Select the desired parameter.
Drive Mode
To activate the Game Control Pref. option, set the AV Selection to GAME. This option is unavailable for a PC source.
Also, the Game Control Pref. option for operability (On) is ignored during multi-screen viewing (page 47) or image
freezes (page 48).
5 ) Press HOME MENU to exit the menu.
Notes: Reset returns all settings to factory defaults.
This setting applies only to input video signals.
46
En
Option
3DYC (optimizes characteristics
for separating brightness
signals from color signals)
I-P Mode (provides optimum
conversion from interlace
signals to progressive signals)
Drive Mode (switches image
display frequency)
Game Control Pref. (establishes
a gaming preference for image
quality or operability)
Blue Only Mode (displays
images in blue only)
is unavailable when setting
.
. or Blue Only Mode
Parameter
Off No effect
High enhances 3DYC
Mid standard 3DYC
Low moderate 3DYC
1 (Motion) optimizes video images
2 (Standard) standard setting
3 (Still) optimizes still images
1 standard setting
2 enhances readability for
horizontally scrolling text
3 optimizes movie content
Off image quality preferred
On operability preferred
Off No effect
On activates Blue Only Mode
Game Control Pref Off
. to .
.
Description