Setting The Macro Light - Pentax Optio Optio WG-1 Operating Manual

IQ enhancer does not function in the following situations:
• When the sensitivity is set to 3200 or 6400
• In the c (Digital SR) mode
• When the drive mode is set to c (Burst Shooting)

Setting the Macro Light

Set whether or not to turn on the macro lights around the lens.
The macro lights turn on when the [Macro Light] is set to O (On).
The default setting is P (Off).
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Macro
Light].
3
Use the four-way controller
(45) to select [O (On)/
P (Off)].
O (On)
P (Off)
The setting is saved.
4
Press the 3 button.
The camera returns to capture mode.
• In (Digital Microscope) mode, the macro lights turn on regardless of
whether the setting is turned on or off.
• If the Power Saving is set to on, the light turns off after the set time.
• The macro lights turn off during playback and when using the USB
connector except when outputting video in Digital Microscope mode.
• Self-portrait Assist and Self-portrait Assist + Smile Capture cannot be
selected when [Macro Light] is set to O (On).
If you take a picture using Self Timer or Remote Control while [Macro
Light] is set to O (On), the macro lights remain on regardless of the
countdown.
Turns on the light
Turns off the light
4 / 4
Rec. Mode
Sharpness
Saturation
Contrast
Date Imprint Off
IQ Enhancer
Macro Light
Exit
MENU
3
147