Pentax Optio Optio WG-1 Operating Manual page 107

1
Press the four-way controller (2) in A mode.
The [Drive Mode] screen appears.
2
Use the four-way controller
(45) to select j or c and
press the 4 button.
The camera is ready for continuous
shooting and burst shooting.
3
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
4
Press the shutter release button fully.
Pictures are taken continuously as long as you keep the shutter
release button pressed.
• The flash does not discharge in j and c modes.
• j and c cannot be selected in 9 (Green), b (Auto Picture),
(Digital Microscope), A (Night Scene), C (Movie),
(Underwater Movie), S (Fireworks), N (Frame Composite),
X (Digital Wide) or F (Digital Panorama) modes.
• Digital Zoom and Intelligent Zoom are unavailable when the sensitivity
is set to 3200 and higher.
Shutter release
button
Four-way controller
4 button
Drive Mode Drive Mode Drive Mode
Continuous Shooting Continuous Shooting Continuous Shooting
MENU MENU MENU Cancel Cancel Cancel
3
OK OK OK OK OK OK
105