How To Change Function Settings; Using The Direct Keys - Pentax K-r Operating Manual

How to Change Function Settings

34
Function settings can be changed using the direct keys, control panel or
menus.
This section explains the basic ways to change function settings.
1

Using the Direct Keys

In Capture mode, you can set Drive Mode, Flash Mode, White Balance
and Sensitivity by pressing the four-way controller (2345). (p.86)
Below, how to set [Flash Mode] is explained as an example.
1
Press the four-way controller (3)
in Capture mode.
The [Flash Mode] screen appears.
2
Use the four-way controller
(45) to select a flash mode.
3
Press the 4 button.
The camera is ready to take a picture.
Flash Mode
Auto Flash Discharge
0.0
MENU
Cancel
OK
OK