Pentax K-r Operating Manual page 219

You can also change the setting from the [A Rec. Mode 2] menu (p.87).
Saving the Cross Processing Setting of a Captured Image
The outcome of cross processing varies each time a picture is taken. If you
are able to take a cross processed image that you like, you can save the
Cross Processing settings used in that image. A total of 3 Cross
Processing settings can be saved for still pictures and movies.
To save Cross Processing setting for movies, set from [Movie] in the [A Rec.
Mode 3] menu with the mode dial set to C (Movie).
1
Select [Cross Processing] in the [A Rec. Mode 2] menu
and press the four-way controller (5).
The [Cross Processing] screen appears.
2
Use the four-way controller (23)
to select [Save Settings] and
press the four-way controller
(5).
The camera will search for cross
processed images starting from the most
recent image taken. (An hourglass icon is
displayed while searching.) When a cross
processed image is found, the screen to save the settings appears.
If there are no cross processed images, the message [No cross
processed image] appears.
3
Use the e-dial to select a cross
processed image.
Cross Processing
Cross Processing
Save Settings
MENU
1 1
Saves this image's Cross Saves this image's Cross
Processing settings Processing settings
Save as Favorite 1
Save as Favorite 2
Save as Favorite 3
MENU Cancel
217
6
OFF OFF
100-0001 100-0001
OK OK