How to Change Function Settings
36
Function settings can be changed using the direct keys, control panel or
menus.
This section explains the basic ways to change function settings.
1
Using the Direct Keys
In standby mode, you can set Sensitivity, White Balance, Flash Mode and
Drive Mode by pressing the four-way controller (2345). (p.74)
Below, how to set [Flash Mode] is explained as an example.
1
Press the four-way controller (4) in
standby mode.
The Flash Mode setting screen appears.
2
Use the four-way controller (45) to
select a flash mode.
3
Press the 4 button.
The camera is ready to take a picture.
Auto Flash Discharge
Auto Flash Discharge
0.0
0.0
Cancel
Cancel
MENU
OK
OK
OK