Pentax K-r Operating Manual page 165

12 EV Compensation
13 Histogram
14 AE Lock
15 Shutter speed
16 Aperture value
17 EV bar
* Indicator 11 (Phase Difference AF frame) is displayed in white during
Live View. When the subject is in focus, a green square frame is
displayed instead. It turns red when the subject is not in focus. It is not
displayed when the focus mode is set to \.
* When 15, 16, and 18 can be changed, 5 appears next to the set value.
* Indicators 20 and 21 are displayed when [Autofocus Method] is set to
I and the camera detects person's face(s). (Up to 16 face recognition
frames are displayed on the monitor.)
Available operations
4 button
Four-way
controller
(2345)
Press and hold
4 button
M button
3
Position the subject on the monitor and press the shutter
release button halfway.
The autofocus system operates.
When the focus mode is set to \, turn the focusing ring until the subject
is clearly visible on the focusing screen.
4
Press the shutter release button fully.
The picture is taken.
When the focusing area is set to S (Select) and
[Autofocus Method] is set to i or S, press this button
to disable direct key operation of the four-way controller
(2345) and enable changing the AF point.
Changes the AF point when the AF point can be changed.
Press the 4 button to return AF point to the center of the
AF frame.
Disables changing the AF point and enables direct key
operation of the four-way controller (2345).
Enlarges the image to 2, 4, or 6 times (when the focus mode is
set to \, enlarges the image to 2, 4, 6, 8, or 10 times). Use
the four-way controller (2345) to move the display area,
and press the | button to return the display area to the center.
(Available only when [Green Button] is assigned to the |
button in [Green Button] of the [A Rec. Mode 4] menu (p.197).)
18 Sensitivity
19 Remaining image storage capacity
20 Main face detection frame (Face
Detection AF)
21 Face detection frame (Face
Detection AF)
163
4