Pentax K-r Operating Manual page 214

212
• Corrections can only be made when using DA, DA L, D FA or some FA lenses
(p.312). [Distortion Correction] and [Lat-Chromatic-Ab Adj] cannot be
selected when an incompatible lens is attached.
• [Distortion Correction] is disabled when using a DA FISH-EYE 10-17mm.
• The Lens Correction function is disabled when using an accessory such as a
close-up ring or rear converter that is attached between the camera and the
lens.
• The shooting speed for continuous shooting may be slower when the Lens
Correction function is activated.
• The effects of the Lens Correction function may be barely noticeable in some
cases due to the shooting conditions or other factors.
1
Press the M button in the status screen.
The control panel appears.
Press the M button when the status screen is not displayed.
2
Use the four-way controller (2345) to select [Distortion
Correction] or [Lat-Chromatic-Ab Adj] and press the 4
button.
6
The [Distortion Correction] or [Lat-Chromatic-Ab Adj] screen appears.
3
Use the four-way controller (45)
to select [Off] or [On].
4
Press the 4 button.
The camera returns to the control panel.
• When a compatible lens is attached and the file format is set to [RAW] or
[RAW+], the correction information is saved as a RAW file parameter and you
can select [On] or [Off] when developing the RAW images. (p.262)
• You can also set [Distortion Correction] and [Lat-Chromatic-Ab Adj] in [Lens
Correction] of the [A Rec. Mode 3] menu (p.88).
Distortion Correction
Off
MENU Cancel OK OK