Main Unit; The Unit's Display - Panasonic DMR-XW480 Operating Instructions Manual

Main unit

 
∫ Remote Control signal sensor
20
30
30
20
Distance: Within approx. 7 m in front of the unit
1 Standby/on switch (Í/I) (
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a
small amount of power.
2 Disc tray ( 16)
3 Connection for digital video (DV) camcorder (
4 Display ( below)
5 Recording indicator
6 Remote control signal sensor (

The unit's display

HDDSDVD
1 SD card slot indicator
2 Copying indicator
3 Disc indicator
4 Drive (HDD, DVD or SD) indicator
5 Remote control signal indicator
6 Main display section indicator
Current time/playback counter, various messages

16, 18)
60)
above)
 

     
Pull to flip down the front
panel.
7 Connection for VCR, Panasonic's video camera, etc.
( 60)
8 Open/close disc tray (
9 SD card slot (
: USB port ( 16)
; Channel select
< Start recording/One Touch Recording (
= Stop
> Start play
Rear panel terminals (


7 Playback indicator
8 USB port indicator
9 Timer recording indicator
This indicator lights up when the timer recording standby
is activated.
   
16)
16)
26)
12, 13, 14, 15)
 
COPY
SD USB
PLAY
  
11
VQT2J62