Main Unit; The Unit's Display - Panasonic DMR-EZ47V Operating Instructions Manual

Main unit

1
EJECT
AV2 IN IN 2 S VIDEO S VIDEO VIDEO VIDEO
6
7
1 Cassette eject button (➡ 12)
2 Disc tray open/close button (➡ 12, 32)
3 Start recording button (➡ 22)
4 Stop button (➡ 22, 33, 40)
5 Play/x1.3 button (➡ 32, 40)
6 Standby/on switch (Í/I) (➡ 18)
Press to switch the unit from on to standby mode or vice versa. In
standby mode, the unit is still consuming a small amount of
power.
7 AV2 input terminals (➡ 54)

The unit's display

Common to DVD/VHS
[A] Recording mode indicator (➡ 22, 23)
[B] Main display
≥Current time
≥Disc recording and play counter
≥VHS recording and play counter
≥Miscellaneous messages, etc.
[C] Copying indicator
[D] Digital broadcast indicator
Lights when the unit is receiving digital broadcast or TV Guide
data.
Remote Control Cassette
signal sensor compartment
L L /MONO AUDIO R /MONO AUDIO R
The unit's display
Opening the front panel
Press down on the
part with your finger.
[A]
2
OPEN/CLOSE
DRIVE SELECT CH CH
8 9 :
8 DVD/VHS drive indicator (➡ 22, 32, 40)
≥Lights when the DVD or VHS drive is selected.
9 DRIVE SELECT button (➡ 22, 32, 40)
≥Drive changes each time you press [DRIVE SELECT].
: Channel Select button (➡ 21, 22)
; DV IN terminal (for a digital video camcorder) (➡ 54)
< One Touch Copying operation button
≥From VHS to DVD (➡ 49)
≥From DVD to VHS (➡ 51)
[B] [C] [D]
COPY D
VHS
1 Timer recording indicator (F) (➡ 26)
On:
When a timer recording programme is registered and a
recordable video cassette is inserted.
Flashes:
When the unit cannot record a timer recording programme (e.g.,
there is no video cassette, etc.).
2 Tape indicator
3 Tape operation status
DVD
1 Timer recording indicator (F) (➡ 26)
On:
When a timer recording programme is registered and a
recordable disc is inserted.
Flashes:
When the unit cannot record a timer recording programme (e.g.,
there is no disc, etc.).
2 Disc operation status
3 Disc indicator
4 5
Disc tray
REC
COPYING COPYING
; <
COPYING COPYING
RQT8858
11