Configure The Basic Settings Of The Camera [Basic Setup] - Panasonic WV-NF284 Network Operating Instructions

Configure the basic settings of the camera [Basic setup]

The basic settings such as time and date and camera name, and the settings relating to the NTP server and the SD
memory card can be configured on the "Basic setup" page.
The "Basic setup" page has 3 tabs of the [Basic] tab, the [NTP] tab and the [SD memory card] tab.
Configure the basic settings [Basic]
Click the [Basic] tab on the "Basic setup" page. (☞ page 15)
The settings such as the camera name, time and date, etc. can be configured on this page.
[Camera title]
Enter the title of the camera. Click the [SET] button after
entering the title of the camera. The entered title will be
displayed in the status display area.
Number of characters for the camera title: 0 - 20
characters
Default setting: WV-NF284
[Time and date setup]
Enter the current time and date. When "12-hours" is
selected for "Time display", "AM" or "PM" can be select-
ed.
Available value: 2006/01/01 00:00:00 -
2035/12/31 23:59:59
Note:
"2036/01/01 00:00:00" or later is unavailable to set
and display.
[Time display]
Select "12-hours" or "24-hours". Enter the current hour
reflecting this setting when entering the current time and
date for "Time and date setup".
Default setting: 24 hours
[Date/time display format]
Select a date/time display format.
When "04/01/2006 13:10:00" is set for "Time and date
setup" after selecting "24-hours" for "Time display", time
and date will be displayed as follows respectively.
DD/MM/YYYY: 01/04/2006 13:10
MM/DD/YYYY: 04/01/2006 13:10
DD/Mmm/YYYY: 01/Apr/2006 13:10
YYYY/MM/DD: 2006/04/01 13:10
Mmm/DD/YYYY: Apr/01/2006 13:10
Default setting: MM/DD/YYYY
[Daylight saving (Summertime)]
Select "ON" or "OFF" to determine whether or not to
apply daylight saving time. Select "ON" or "OFF" to
determine whether or not to apply daylight saving time.
ON: Applies summer time. An asterisk (*) will be dis-
played on the left side of the displayed time and
date.
OFF: Does not apply summer time.
Default setting: OFF
[Link/Access LED]
Select "ON" or "OFF" to determine whether or not to
light the link indicator, the access indicator, and the SD
memory card error indicator. Select "ON" to check the
network status by lighting the indicators. Select "OFF" to
turn off the indicators at all times.
• Even when "ON" is selected, the link indicator and
the access indicator inside the dome cover will not
light when the indicators ON/OFF switch on the
camera is set to "OFF".
Default setting: ON
17