[Gps Setting] - Panasonic Lumix DMC-ZS5 Operating Instructions Manual

Before use, read "About GPS" (→8) and "User License Agreement for Location Name
Data" (→165).
Select [GPS SETTING] from
the Travel Mode menu (→20)
Select [ON] or
• To cancel, select [OFF]
Close the menu

[GPS SETTING]

●
[ON]
●
●
●
●
Positioning is not possible unless signals are received from three or more GPS
satellites. Move to a location where the sky is as clear as possible before performing
positioning.
[GPS SETTING]: Using GPS
Description
Positioning continues even when the camera's
power is off, so you can record pictures with
location name information recorded on them as
soon as you turn on the power again.
Because the positioning continues even when the
camera's power is off, battery power is consumed.
When the camera's power is off, the positioning
stops in the following cases. If the positioning
stops, the positioning will take some time, after
turning on the camera's power.
• When the battery level is low,
the battery is replaced
• When positioning is not successful for 2 hours
after the camera's power is turned off
• When the camera's power has not been turned
on for 3 hours
The positioning may take some time, after turning
on the camera's power. Location name information
will not be recorded for pictures recorded at this
time while positioning is in progress.
■
When checking GPS reception
Select [INFO] in Step
current reception.
• Set [GPS SETTING] to [ON] or
Number of GPS satellite
signals received
Latitude and longitude
• Press [MENU/SET] to start positioning
comes on, or
to check the
(→85)
Received GPS time
Positioning operation timing
When the camera's
power is on
• Immediately after the
power is turned on
• Every 5 minutes
When the camera's
power is off ∗
• Every 15 minutes
∗ The status indicator
flashes when
positioning.
When the camera's
power is on ∗
• Immediately after the
power is turned on
• Every 5 minutes
∗ Positioning is not
performed when the
camera's power is off.
VQT2R20
85