[Economy] - Panasonic Lumix DMC-ZS5 Operating Instructions Manual

For advanced features
Table of Contents

Advertisement

Using the [SETUP] menu
For details about the setting procedure in the [SETUP] menu (→20)
Item
[REC AREA]
Enables verification of
the recordable area for
a motion picture before
recording.

[ECONOMY]

Turn off the power or
make the LCD monitor
go dark while not using
the camera to minimize
battery consumption.
24
VQT2R20
[OFF]/[ON]
• Recordable area displayed for motion
pictures should be interpreted as a
Guideline.
• When using Extended Optical Zoom,
the recordable area may not always be
displayed for certain zoom ratios.
• This setting cannot be used with Intelligent
Auto Mode.
[SLEEP MODE]
[OFF]/[2 MIN.]/[5 MIN.]/[10 MIN.]:
Automatically shut off power while not in use.
• To restore → Press the shutter button halfway, or turn on
• Cannot be used in the following cases:
When using AC adaptor (optional) and DC coupler
(optional), when connected to computer/printer, during
motion picture recording/playback, during Slide Shows,
during automatic demo playback
• Settings fixed to [5 MIN.] in [INTELLIGENT AUTO] Mode
or [CLIPBOARD] Mode, or [10 MIN.] while Slide Show is
paused.
[LCD POWER SAVE]
[OFF]/[ON]:
The LCD monitor goes dark to minimize power
consumption.
• Reduces the picture quality of the LCD monitor display
during recording to minimize battery consumption
(except for the Digital Zoom area). Note, however, that
there is no effect on the recorded picture.
• When [LCD MODE] is set, the brightness of the LCD
monitor follows the setting in [LCD MODE], but the
picture quality of the LCD monitor stays at a low level.
[REC AREA] is not available in the DMC-ZS6/DMC-ZS5.
(Continued)
Settings, notes
the power again.
This section is not
recorded.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents