Q&A
Others
Menu not displayed in desired language.
●
Change [LANGUAGE] setting (→28).
Camera rattles if shaken.
●
This sound is made by the lens movement and is not a fault.
Cannot set [AUTO REVIEW].
●
Cannot be set when any of the following are in use: [AUTO BRACKET], [MULTI ASPECT], [BURST],
[SELF PORTRAIT], [HI-SPEED BURST], and [FLASH BURST] Scene Modes, and [AUDIO REC.].
Red lamp illuminated when pressing shutter button halfway in dark locations.
●
[AF ASSIST LAMP] set to [ON] (→106).
AF Assist Lamp is not illuminated.
●
[AF ASSIST LAMP] is set to [OFF].
●
Not illuminated in bright locations or when using [SELF PORTRAIT], [SCENERY], [NIGHT
SCENERY], [SUNSET], [FIREWORKS], [AERIAL PHOTO], or [UNDERWATER] Scene Modes.
Camera is hot.
●
Camera may become a little warm during use, but this does not affect performance or quality.
Lens makes a clicking noise.
●
When brightness changes, the lens may make a clicking noise and the monitor brightness may also
change, but this is due to aperture settings being made.
(Does not affect recording.)
Clock is incorrect.
●
Camera has been left for a long period.
→ Reset the Clock (→17, 19).
●
Long time was taken to set Clock (Clock behind by this amount).
When using zoom, picture becomes slightly warped and the edges of the subject
become colored.
●
Pictures may be slightly warped or colored around the edges, depending on the zoom ratio, but this
is not a fault.
Zoom movement stops momentarily
●
The zoom movement stops momentarily during Extended Optical Zoom and i.Zoom operation, but
this is not a malfunction.
Zoom does not reach the maximum ratio
●
If the zoom ratio stops at 3 ×, [MACRO ZOOM] has been set. (→50)
File numbers are not recorded in sequence.
●
File numbers are reset when new folders are created (→142).
File numbers have jumped backwards.
●
Battery was removed/inserted with power on.
(Numbers may jump backwards if folder/file numbers are not correctly recorded.)
162
VQT2R20
Troubleshooting
(Continued)