[Lcd Mode]/ [Display Size]/ [Guide Line]/ [Histogram] - Panasonic Lumix DMC-ZS5 Operating Instructions Manual

For details about the setting procedure in the [SETUP] menu (→20)
Item
[LCD MODE]
Make LCD monitor easier
to see.
[DISPLAY SIZE]
Change the display size
of the menu.
[GUIDE LINE]
Select recording
information display and
types of guidelines. (→46)
[HISTOGRAM]
Check subject brightness
on graph. (→46)
[OFF]: Normal (cancel setting)
[AUTO POWER LCD]:
The brightness is adjusted automatically depending on
how bright it is around the camera.
[POWER LCD]:
Makes screen brighter than normal (for outdoor use).
• [AUTO POWER LCD] does not work in the following cases:
During playback, during menu display, when connected to
computer/printer.
• [POWER LCD] returns to ordinary brightness if there is no
operation for 30 seconds when recording. (Press any button to
make brighter again).
• Because the picture shown on the LCD monitor screen
emphasizes brightness, some subjects may look different than
their actual appearance, but this will not affect the recorded
picture.
• Block out sunlight (with hand, etc.) if reflection makes screen
difficult to see.
• Setting [LCD MODE] will reduce the number of pictures that can
be recorded and recording time.
• When [LCD POWER SAVE] is set, the brightness of the LCD
monitor follows the setting in [LCD MODE], but the picture quality
of the LCD monitor stays at a low level.
[STANDARD]/[LARGE]
[REC. INFO.]
[OFF]/[ON] (Display recording information with guide
lines.)
[PATTERN]
/ : Change the patterns of guide lines.
[OFF]/[ON]
Settings, notes
23
VQT2R20