Useful for enlarging and saving parts of maps, etc.
■
To register zoom enlarged size and position
Enlarge with
zoom lever and
select position
with ▲▼◄►
■
To view registered ratio and position:
Display picture
with
●
When a picture with a Zoom Mark is deleted, both the original picture and picture with
Zoom Mark will be deleted.
●
Picture can be deleted even while zoomed in.
A special menu is used in [CLIPBOARD] Mode.
[REC ON CLIPBOARD] menu (REC/PLAY switch:
[PICTURE SIZE] [2 M]
[AUDIO REC.]
Record sound (5 seconds) simultaneously. [OFF] / [ON]
[LCD MODE]
[OFF] / [AUTO POWER LCD] / [POWER LCD] (→23)
[CLOCK SET]
(→22)
[PLAY ON CLIPBOARD] menu (REC/PLAY switch:
[CANCEL
Select
MARK]
Cancel with [MENU/SET].
Copy single pictures from clipboard to card. (Zoom Mark will not be copied.)
Select clipboard picture with ◄► and press [MENU/SET].
[COPY]
Select [YES] with ▲▼ and press [MENU/SET].
[LCD MODE]
[OFF] / [POWER LCD] (→23).
●
Other items on the [SETUP] menu will reflect settings made in the [PROGRAM AE]
Mode, etc.
Zoom Mark
Press
Zoom Mark
Displayed on registered pictures
Turn to T side
(No need to manually
enlarge or move)
Zoom lever
[CLIPBOARD] menu
(Priority to picture quality) / [1 M]
marked clipboard picture with ◄►.
• To change zoom and
position: Perform steps
and
• To finish Zoom Mark setting:
Restore zoom to original
(1 x) ratio
Immediately displayed at
registered ratio and position
Mode dial:
)
(Priority to the number of pictures)
Mode dial:
)
VQT2R20
• To cancel
Zoom Mark
→ [CANCEL
MARK]
(below)
111